Add a Recording to a QMplus Course (EchoVideo Class)
Completion requirements
In EchoVideo (Q-Review), a class is the space linked to a QMplus course. Adding a video to a class makes it available to all staff and students enrolled on that course.
Terminology note: In this guidance, Q-Review refers to lecture capture and scheduled teaching recordings, while EchoVideo refers to the wider video platform, including the media management functions that replaced QMplus Media (Kaltura).
EchoVideo Class
Table of contents
1. Add a Recording to a QMplus Course (EchoVideo Class) [edit]
2. Step 1: Gather course details (from QMplus) [edit]
3. Step 2: Find your video in EchoVideo [edit]
Add a Recording to a QMplus Course (EchoVideo Class) [edit]
Before you begin, ensure that your QMplus site is connected to EchoVideo Q-Review. If this has not yet been completed, please set this up first.
For further guidance, refer to this guide or contact your local school learning technologist for support.
Important: You must be signed in to QMplus or EchoVideo (Q-Review) with your QMUL email address to view this guidance video.
Step 1: Gather course details (from QMplus) [edit]
Go to the relevant QMplus courseScroll to the Q-Review sectionClick the Settings tabMake a note of:- Course name
- Course code
- Section
Step 2: Find your video in EchoVideo [edit]
- Go to your EchoVideo Library
- Locate the video you want to share
- Click on the video to open it
Step 3: Add the video to a class [edit]
- Select the Publishing tab
- Under Added to, click Add to class
- Choose New class
- Search for your course using the details you noted
- Select the correct term and section
- Confirm the class name
- Leave other settings as default (in most cases)
- Click Done
Step 4: Check student access [edit]
To confirm the video is available:
- Return to the QMplus course
- Click the Q-Review link
- Check that the video appears in the course area
